Model 415 - Reducing Regulator
Click to enlarge
Price: $297.00
Product ID : AE415
Manufacturer: Aqua Environment

Purchase

  • Buy 5 - 9 and get an additional 10 % off
  • Buy 10 - 15 and get an additional 20 % off
  • Buy 16 - 30 and get an additional 23 % off

Description

*The default selection shown above is generally good in stock, and can ship immediately. Choosing non-standard options may increase lead time 3-5 days.

AE Model Component Operation and Maintenance Sheets -Click to follow

Model 415 -  6,000 PSI  Reducing Regulator

 

GENERAL INFORMATION

 The model 415 is an economical, piston type, hand load regulator. lt is available in four standard outlet pressure ranges ot 0 to 400 PSI. 0 to 1500 PSI. 0 to 5000 PSI. and 0 to 6000 PSI. Other pressure ranges and a dome loading version are available on special order.

Maximum inlet pressure for all ranges is 6000 PSI. The regulator seats are protected by a 30 micron filter. The regulator seal, puppet assembly and filter are contained in an easily replaced valve cartridge assembly pictured in the section drawing to the right.  The low cost valve cartridge is factory preassembled. This cartridge assembly permits very easy and fast in-field servicing.

All units are self venting. Unvented units can be provided on special order.

An optional mounting bracket (part number 657) permits panel mounting in any orientation or extension from the panel surface. The unit is exceptionally rugged and insensitive to inlet contaminates. This, in addition to its low cost has resulted in its extensive use ln field applcalions such as air and gas fill stations for over 40 years.

See drawing 1034 for flow curves.

This regulator is available in brassor aluminum

SPECIFICATIONS

- Maximum inlet pressure -- 6000PSl (40 MPa)
- Outlet pressure ranges
415-400-  0 to 400PSl
415-1500  0 to 1500 PSI
415-5000  0 to 5000PSI
415-6000  0 to 6000 PSl
- Flow coefficient   Cv- .06 (.08"orifice size)
-Materials --- body and cap - anodized aluminum
                    lnternals-- brass. stainless steel
                    seals---- Viton. KEL-F
Size ---------- 2.25" dla. x 5.5" high

TYPICAL APPLICATIONS


  • Component testing
  • Air tank fill stations
  • Fire fighting air systems
  • Instrumentation and calibration panels
  • Process industry control
  • Shipboard and off shore air and gas control
  • Aircraft service equipment
  • Electronic industry rare gas flow
  • Vehicle CNG stations
  • Paint ball fill stations
  • SCUBA operations

Comment on Facebook

Product Reviews

Login or Register to write the first review.