Model 907 5,000 PSI by 6,000 PSI Unloader Valve
- Brand: Aqua Environment
- Product Code: AE907
- Availability: In Stock
Price:$127.00
- 5 or more $114.30
- 10 or more $101.60
- 16 or more $97.79
*The default selection shown above is generally good in stock, and can ship immediately. Choosing non-standard options may increase lead time 3-5 days.
AE Model 1018 Component Operation and Maintenance Sheets -Click to follow
Model 907 5,000 PSI by 6,000 PSI Unloader Valve
|
GENERAL INFORMATION The 907 unloader valve uses a low control pressure to shut oil a high pressure line such as a compressor discharge. The control pressure could be low pressure shop air. air or gas from a compressor interstage line, or pressure generated by a compressor oil pump to mention a few possibilities. The primary use of these valves is to relieve pressure in compressor interstage and discharge piping when it is shut down so it can be restarted without a load. When control pressure to the valve is released, the valve opens. The model 907 requires 70 PSI control pressure to close a 6000 PSI line. The model 907 will take control pressures as high as 5000 PSI without damage. The model 907 vent can be piped away via the 1/8" pipe thread side port. The 907 has internal filtration and over pressure protected soft seats to insure long term, bubble tight, reliable operation. SPECIFICATIONS • Maximum rated pressure ...... 6000 PSI (40 MPa) • Maximum control pressure 5000 PSI • Minimum control pressure 70 PSI at 6000 PSI 50 PSI at 4000 PSI 25 PSI at 2000 PSI • Flow capacity model 907 Cv - .06 (06" orifice) • Inlet filtration 20 micron • Materials seals: KEL-F, nylon, Viton, body: anodized aluminum internals: brass, stainless steel • Ports inlet 1/4" male NPT Control 1/4" male NPT outlet 1/8' female NPT • Size 1.5" dia. 3.5" long |
Aqua Environment Tips, Flow Charts, and Quick Reference Page