Model 1310 6,000 PSI Back Pressure Regulator

Model 1310 6,000 PSI Back Pressure Regulator

  • $77.00


  • 5$69.30
  • 10$61.60
  • 16$59.29

AE Model 1310 Component Operation and Maintenance Sheets -Click to follow

Model 1310 6,000 PSI Back Pressure Regulator

GENERAL INFORMATION

 Also known as a priority valve, the model 1310 is a fully balanced, economical regulator.
It serves a wide variety of uses, however its main use is on small compressors.
The regulator will improve moisture separator efficiency and filter life as much as 450%.
This is done by maintaining pressure in the separator and filter at about 1800 PSI when tank pressure is lower.

TECHNICAL SPECIFICATIONS

• Maximum rated pressure - 6000 PSI (40 MPa)
• Set pressure - 1900 PSI ((non-adjustable)
• Materials - Anodized aluminum body, brass, stainless steel, Viton seals
• Flow capacity - 1 to 10 SCFM
• Leakage - Zero external. 005 SCFM internal
• Ports - 1/4- FNPT inlet; 1/4- MNPT outlet
• Size - 1" hex by 2.4" long

TYPICAL APPLICATIONS

• Provide back pressure for small high pressure compressor filter systems
• Provide back pressure for floating piston compressors
• Other low flow high pressure back pressure control applications

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Aerocon Systems © 2024